• <menu id="akqmk"><tt id="akqmk"></tt></menu><menu id="akqmk"></menu>
  • 全自動造型機廠家

    —專注水平造型機研發、生產!

    全國24小時咨詢熱線: 13926238353

    配置說明

    造型機水口棒(澆注棒)

    136006.jpg

    (上圖為兩種款式的全自動造型機澆注棒)

    鑄造造型機專用水口棒,水平全自動造型機澆注棒,304不銹鋼材質內置抗疲勞伸縮彈簧。安裝于造型機上砂箱的壓實板,可根據砂箱高度自由伸縮,在砂箱合箱射砂及壓實前后與模具緊密接觸,壓實脫模后自動形成澆口或冒口。根據砂型內部型腔澆注系統的設計選擇合適的澆注棒,通常為直徑30mm或直徑40mm兩種規格作為澆注棒,常規伸縮范圍在125cm - 240cm之間,其他規格長度則需另外定做。澆注棒也稱水口棒,而冒口也是以同樣的方式制作,一般直徑為25mm或30mm。

    Special nozzle rod for casting molding machine, pouring rod for horizontal automatic molding machine, 304 stainless steel, built-in anti fatigue telescopic spring. The compaction plate of the sand box installed on the molding machine can expand freely according to the height of the sand box. It is in close contact with the mold before and after sand shooting and compaction of the sand box. After compaction and demoulding, it will automatically form a gate or riser. According to the design of the pouring system inside the mold cavity of the sand mold, select the appropriate pouring rod, usually 30mm in diameter or 40mm in diameter. The conventional expansion range is 125cm - 240cm, and the length of other specifications needs to be customized. The pouring rod is also called nozzle rod, and the riser is also made in the same way, generally with a diameter of 25mm or 30mm.

    136033_02.jpg

    上圖為后期改進的造型機澆注棒,采用三段式設計,伸縮更為靈活流暢,加寬了進水口的直徑方便鐵水的澆注及澆注后冷卻過程中補縮,以及在日常使用中方便安裝與拆卸。

    The figure above shows the pouring rod of the later improved molding machine. It adopts the three-stage design, which makes the expansion more flexible and smooth, widens the diameter of the water inlet, facilitates the feeding of molten iron during pouring and cooling after pouring, and facilitates installation and disassembly in daily use




    回到頂部

    點擊撥打電話

    24小時服務在線,歡迎咨詢

    廣東中鑄智能裝備有限公司
    電話:13926238353
    聯系人:李經理
    郵箱:470199755@qq.com
    地址:廣州市花都區迎賓大道123號
    備案號:粵ICP備16050083號
    中鑄機械網址:http://www.swap-resources.com

    美国性色av性色生活片
  • <menu id="akqmk"><tt id="akqmk"></tt></menu><menu id="akqmk"></menu>